UCTRONICS IEEE
802.3af Micro-USB
Ethernet (PoE)
Adapter
U6113
Copyright
Specifications are subject to change without
notice. No part of the specifications may be
reproduced in any form or by any means or
used to make any derivative such as transla-
tion, transformation, or adaptation without
permission from UCTRONICS. All rights re-
served.
Package Contents
The following items are included in your pack-
age:
●
UCTRONICS IEEE 802.3af Micro-USB
Ethernet (PoE) Adapter
●
This User Guide
Introduction
Thank you for choosing UCTRONICS U6113
IEEE 802.3af Micro-USB Ethernet (PoE) Adapt-
er.
It is an ultimate Micro-USB Ethernet adapter
with multiple working modes, which helps you
supply Ethernet and power over a single Mi-
cro-USB connector. With its PoE (Power over
Ethernet) support, you can even use a single
Ethernet cable to deliver both network con-
nection and power supply to your Micro-USB
devices (that support ethernet over Micro-
USB port) in a stable hardwire connection.
Note:
You need an PoE switch or injector
(IEEE 802.3af recommended) to serve as the
PSE (Power Source Equipment) when you are
using this adapter in the PoE mode.
Identifying Ports
1
2
1
2
3
Micro-USB Power In:
Optional power
input. Only required when you want the
target device powered but your Ethernet
cable does not carry PoE power.
PoE/Ethernet In:
2 ways to connect. You
can connect an Ethernet cable that carries
the IEEE 802.3af compliant PoE signal to
this port.
Or if you connect a plain Ethernet cable
without power, then an extra power
adapter is required in
1
to deliver both
power and data. otherw
ise, it works as a
casual USB Ethernet adapter.
Micro-USB Out:
Connect to the Micro-
USB port of your target device which
support power and Ethernet over USB at
the same time.
3
