Uconnect 730N, Owner'S Manual Supplement, Page: 139 / 232

Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the Uconnect®
Phone system Voice Training feature may be used.
1. Press the Voice Command hard-key, say “SYSTEM
SETUP” and once you are in that menu then say
“VOICE TRAINING.”
This will train your own voice to the system and will
improve Command.
2. Repeat the words and phrases when prompted by the
Uconnect® Phone system. For best results, the Voice
Training session should be completed when the ve-
hicle is parked, engine running, all windows closed,
and the blower fan switched off.
This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.
If the system does not understand the words VOICE
TRAINING:
1. Press the MENU hard-key.
2. Press System Setup.
3. Press the Voice Command soft-key to access the Voice
Command menu.
•
Touch the Show Help Screens During Voice Command
Sessions to show or hide the help screens when using
the speech dialog system.
•
Touch the Reset Voice Command System to Factory
Defaults when you would like to restore the Voice
Command system to factory default settings.
•
Touch the Start Voice Training soft-key to train the
Voice Command system.
•
Touch the Listen to Tutorial soft-key to hear instruc-
tions on voice training.
128 VOICE COMMAND