3
O P E R A T I N G I N S T R U C T I O N S
PARTS IDENTIFICATION
Ⅲ
4
O P E R A T I N G I N S T R U C T I O N S
CAUTIONS BEFORE INSTALLATION
Ⅱ
NOTE THE FOLLOWING IMPORTANT POINTS
A. Main Unit
B. Accessories
1. Do not install in a location where the product may be exposed to water, excessive moisture, or condensation
formation.
2. To avoid damage to electronic components by high humidity, provide adequate ventilation by opening a
window and/or a door when bathing.
3. Use a water supply of 0.5kgf/cm
2
to 7.5kgf/cm
2
(49kpa~735kpa).
4. Connect to a potable water source.
5. The water remaining in the unit may sometimes freeze during storage in winter. Make arrangements to
prevent the hoses from freezing. If freezing occurs, warm the unit in room temperature before installation.
6. The thermal protector in the water tank may sometimes trip during storage or transportation in warm
weather, causing non-operation. If this occurs, cool the unit in room temperature before installation.
7. The rated power voltage is 120V AC, 60Hz and the rated power consumption is 630W. Use wiring and
electrical outlet appropriate for this level of power.
8. Do not supply electrical power to the unit unless the plumbing work has been completed. Damage could
result.
1. The electrical outlet, which must be a 120V~60-Hz and at least a 10-Amp grounded outlet,
should be located on the wall within reach of the unit
’
s power cord.
2. Always use a three-prong grounded outlet. If you have only a standard two-prong outlet, it must
be replaced by a properly grounded three-prong outlet.
3. A personal protection Residual Current Device(R.C.D) must be installed in the circuit supplying
power to the unit.
4. If an extension cord is needed, only use an extension cord that has a three-prong grounded plug
and a three-slot receptor that will accept the unit
’
s three-prong plug. The electrical rating of the
extension cord must be equal to or greater than the electrical rating of the unit.
Grounding Instructions
Failure to follow these grounding instructions may cause
electrical shock, fire, serious personal injury, or damage to the product.
WARNING!
Nozzle plate
Cleansing nozzle
Drain plug
Supporter body
Control panel
Power supply cord
Water supply hose
to the nozzle
Main unit
Flexible Hose A
Branching Valve
Flexible Hose B
Conversion Nut
