7. Relocation
or
Disposal
7.1 Relocation
7.1.1 Removal of the machine from its present location
Be sure to pull out the power plug from the collator.
Remove the stapler-puncher from the collator.
7.1.2 Transport
・
Transport the removed parts, attachments and Operation Manual together with the machine.
・
Take care not to expose the collator to strong vibration or shock.
7.1.3 Installation
When installing the collator at its new location, observe the same procedure as when first installing it.
7.2 Disposal
When disposing of the collator, ask a contractor specialized in industrial waste disposal to handle it in
accordance to the ordinance of each municipality.
8. Product
Specifications
8.1 Specifications
Paper stacking method
Crisscross and straight stacking (to be switched)
Stacking capacity
320 mm (about 3,200 sheets of woodfree 55kg paper)
Paper size
A5 to A3SR
148
×
210 mm to 320
×
450 mm
Paper quality
Woodfree paper, medium-quality paper, woodfree perforated paper (788
×
1,091, 45 –110 kg)
Crisscross method
25 mm transverse slide crisscross
Processing capacity
In case A4 paper is used (with the shorter side at the top)
When connected with a single collator:
High-speed = 42 sets /low-speed = 32 sets per minute
When connected with connected collators:
High-speed = 27 sets /low-speed = 20 sets per minute
Power consumption
0.6A 50W
Dimensions 698(W)
×
615(D)
×
805(H) mm
Weight
Machine body: 51 kg
Forceful ejector: 2.7 kg
Additional functions
Detection of stacking paper jam
Stacking full detection
Enable to position the table at any height
Detection of dolly
Instant stop in case of irregularity in the collator
NOTE: Specifications and appearance are subject to change without notice for improvement
- 13 -
