Penates 10.1SP
Driver Version 2.05
17
THE CALIBRATION SETTING TAB
Calibration:
Click “Calibration” to activate the calibration screen.
Reset Calibration:
Return to the default settings.
Rotate:
Select the orientation that you would like to rotate your
Penates
orientation.
Monitor Parameter:
Adjust the brightness and contrast of your
Penates
. If you would like to
recover the manufacturer settings, click “Monitor Default Setting”.
→ Caution: Hold the pen 90 ° vertically on the calibration screen and use the pen tip to click on
the center of the crosshairs in the calibration dialogue.