ZED-F9K - Integration manual
5.
Set the configuration by clicking the
Send
button at the bottom of the message tree view.
Remember to set the u-center baud rate to match the value set in the receiver.
Figure 52: u-center UBX-CFG-VALSET message view for setting the CFG-UART1-BAUDRATE configuration item
that controls the baudrate of UART1
Next, some UBX example messages are configured to enable viewing the receiver status.
1.
Select
Group
: CFG-MSGOUT,
Key name
: CFG-MSGOUT-UBX, and select the UART1 required
messages.
2.
Add each message to the list, setting the value of each to 1.
UBX-20046189 - R01
Appendix
Page 100 of 105
C1-Public
Early production information
