Ublox XPLR-IOT-1, User Manual

Page: 34 / 39

XPLR-IOT-1 - User guide
UBX-21035674 - R02 Module firmware updates Page 34 of 39
C1-Public
3. Type the following command to enable NINA-W15 over the USB-UART interface 2:
modules NINAW156 power_on
4. Open s-center and connect to NINA-W15 on USB-UART interface 2.
5. At this point, NINA-W15 may be updated through s-center [10] .
5.3 SARA-R5
SARA-R5 may be updated over the USB-UART interface. The module must first be enabled through
the application.
1. Follow the instructions at USB connection to connect XPLR-IOT-1 to a host PC running Windows.
2. Open a terminal program, such as Putty [29] or TeraTerm [30] , to the virtual COM port (VCP) for
NORA-B1 (interface 0) with the settings 115,200 bps, no parity, 8 data bits, 1 stop bit. Set
terminal line endings to carriage return only (CR, or hex 0x0d).
3. Type the following command to enable NINA-W15 over the USB-UART interface 2:
modules SARAR5 power_on
4. At this point, SARA-R5 may be updated through EasyFlash. See also the m-center webpage [11]
and EasyFlash firmware update utility [15].
5.4 MAX-M10
MAX-M10 firmware resides in ROM and does not require updates.