Ublox NINA-B222-04B, System Integration Manual

Page: 34 / 35

NINA-B2 series - System integration manual
UBX-18011096 - R05 Related documents Page 34 of 35
C1- Public
Related documents
[1] u-connectXpress AT commands manual, UBX-14044127
[2] NINA-B2 series data sheet, UBX-18006649
[3] Packaging information reference, UBX-14001652
[4] EVK-NINA-W1/EVK-NINA-B2 user guide, UBX-17011007
[5] u-connectXpress user guide, UBX-16024251
[6] s-center user guide, UBX-16012261
[7] Communicating with a u-blox module over SPI bus, application note, UBX-20028725
[8] u-connectXpress bootloader protocol specification, UBX-17065404
☞
For product change notifications and regular updates of u-blox documentation, register on our
website,
www.u-blox.com .
Revision history
Revision Date Name Comments
R01 27-Apr-2018 fbro, kgom Initial release.
R02 3-Jul-2018 cmag, kgom Modified the product status to Engineering Sample on page 2. Provided
reference to NINA-B2 Getting Started.
R03 28-Jan-2019 fbro, mwej Modified the product status to Initial Production. Removed support for
external LPO clock (section 1.4.1). Updated block diagram (Figure 1). Updated
Output power data (Table 1). Removed pending status for FCC/IC approval in
section 5.
R04 17-Dec-2019 flun Cleaned up Applicable Products section.
R05 18-Sep-2020 flun Added SPI in section 1.7.2. Updated ESD Updated boot strapping pins in
section 1.6.1, and clarified RTS/CTS pins in section 1.7.1.
Updated the Glossary, Related documents and applicable products featured
in the Document information section.
R06 01-Nov-2021 lkis Updated approved reflow soldering cycle to two in Reflow soldering process .
Updated Software chapter and all sub-sections. Added programming
methods in detail. Revised Product testing and Handling and soldering and
information, including the removal of the earlier requirements for bow and
twist on bare PCBs. Revised maximum ESD sensitivity in
ESD guidelines .