TOBY-L1 and MPCI-L1 series - System Integration Manual
UBX-13001482 - R04
Advance Information
System description
Page 34 of 90
1.11
Mini PCIe specific signals (W_DISABLE#, LED_WWAN#)
Mini PCI Express specific signals (
W_DISABLE#
,
LED_WWAN#
) are not available on TOBY-L1 series
modules.
MPCI-L1 series modules include the
W_DISABLE#
active-low input signal to disable the radio operations as
specified by the
PCI Express Mini Card Electromechanical Specification
MPCI-L1 series modules include the
LED_WWAN#
active-low open drain output to provide the Wireless Wide
Area Network status indication as specified by the
PCI Express Mini Card Electromechanical Specification
For details of the indicator protocol used please see Section 1.14.1.
For more electrical characteristics details refer to the
MPCI-L1 series Data Sheet
1.12
Reserved pins (RSVD)
Pins reserved for future use, marked as
RSVD
, are not accessible on MPCI-L1 series modules.
TOBY-L1 modules have pins reserved for future use (
RSVD
), to be left unconnected on the application board.
1.13
Not connected pins (NC)
Pins internally not connected, marked as
NC
, are not available on TOBY-L1 series modules.
MPCI-L1 series modules have pins internally not connected, marked as
NC
: they can be left unconnected or they
can be connected on the application board according to any application requirement, given that none function is
provided by the modules over these pins.
