Download the EVK-U2X software (and documentation)
from www.u-blox.com/evk-downloads and install the
software. See installation notes on back of card.
1. Insert SIM card in
SIM card holder
.
2. Connect the cellular antenna with SMA connectors
to the
antenna connector
(SMA female).
3. Connect the GNSS antenna to the
GNSS antenna
SMA connector, if GNSS functionality is required.
4. Connect power adapter to
9 – 18 V power input
connector (J400) (+12 V). LED DL401 is blue.
5. To supply power to the board, turn
main power
(SW400) switch to ON position. LED DL400 is green.
The module switches on.
Connection for communication via UART:
6. Connect USB cable to
mini USB connector
OR
Connect RS232 cable to
cellular RS232
connector
Connection for communication via USB:
7. Connect USB cable to mini USB connector on the
adapter board (
cellular native USB
).
Quick Start EVK-U2x
2. Setup
Copyright © 2014, u-blox AG
1. Overview
1
2
5
4
7
UBX-14002546 - R03
3
6
