EVK-F10T - User guide
UBX-23008022 - R01
Device configuration
Page 19 of 23
C1- Public
Figure 12 EVK-F10T communication port
The
identification
of EVK-F10T on Windows machines has been improved to provide descriptive
names to each virtual communication (COM) port as shown in
•
EVK-F10T UART:
Use this COM port for UART communication with the receiver via
the FTDI USB-to-UART interface.
9.1.1
UART baud rate
configuration
The baud rate for the UART communication to the receiver can be configured in the
CFG-UART1 -
BAUDRATE
configuration key depending on the
UART interface that is in use. The default baud rate is
set to 38400 as shown in
, and the maximum baud rate is 921600.
Figure 13 EVK-F10T UART baud rate configuration