Ublox EVK-F10T, User Manual, Page: 8 / 23

EVK-F10T - User guide
UBX-23008022 - R01 Device description Page 8 of 23
C1- Public
4 Device description
EVK-F10T evaluation kit contains u-blox NEO- F10T GNSS receiver with RTC, SPI flash memory, TCXO
and SAW fi lter.
4.1 Interface connection
The EVK-F10T supports UART and USB (serial to USB communication) interfaces. To connect the
EVK to a PC, use the included USB cable depending on the interface in use. The EVK includes an on-
board USB-to-Serial converter for USB-to-UART communication with the receiver. For measuring
current and evaluating the available digital interfaces, additional measurement equipment and
devices can be connected to the 14-pin connector on the front of the EVK unit. There is a dedicated,
buffered, 50
Ω SMA connector output for the configurable 1 PPS time pulse. The EVK design allows
the front side pins to be used simultaneously with the other ports.
☞
Do not drive any of the IO pins when the EVK is not connected to a power supply and powered up.
Figure 1 Connecting the EVK-F10T unit for power supply and communication
Figure 2 shows the front and back of the EVK-F10T evaluation unit.
Figure 2 The front and back of EVK-F10T
Front
Back