Ublox EVK-F10T, User Manual, Page: 6 / 23

EVK-F10T - User guide
UBX-23008022 - R01 Specifications Page 6 of 23
C1- Public
2 Specifications
Parameter Specification
Serial interfaces 1 USB Type-C (NEO-F10T serial port)
14 pin – 3.3 V logic UART (NEO-F10T serial port)
Timing interfaces 1 time pulse output through 14-pin connector
1 time pulse LED
1 time pulse output through SMA connector
1 external interrupt input
Dimensions 105 x 64 x 26 mm
Power supply 5 V via USB or powered via external power supply (pin 14) of the 14 pin connector
(V5_IN) and pin 13 (GND)
Normal operating temperature –40 °C to +65 °C
Table 2 EVK- F10T specifications
2.1 Safety precautions
EVK-F10T must be supplied by a PS1 class limited power source. See section 6.2.2.4 of IEC
62368-1:2018 [5] for more information on the PS1 class.
In addition to a limited power source, only ES1 class circuits are to be connected to the EVK-F10T,
including interfaces and antennas. See section 5.2.1.1 of IEC 62368-1:2018 [5] for more information on
the ES1 class.
2.2 Certifications
The EVK-F10T is designed to comply with the essential requirements and other relevant provisions
of Radio Equipment Directive (RED) 2014/53/EU.
The EVK-F10T complies with the Directive 2011/65/EU (EU RoHS 2) and its amendment Directive
(EU) 2015/863 (EU RoHS 3).
Declaration of Conformity (DoC) is available on the u-blox website .