ANNA-B112 - System integration manual
UBX-18009821 - R09
System description
Page 12 of 66
C1-Public
1.6.4
Low power clock settings for u-connectXpress software
The low power clock settings for the u-connectXpress software are stored in a special flash area and
can only be written only once. The only way to clear the settings is to erase the flash memory. See
section 2.3.2 for details on SWD flashing.
This section describes the AT command and the available settings for the low power clock.
This AT command requires the module to be set in production mode.
•
AT+UPROD=1
o
Set the module in production mode
•
AT+UPRODLFCLK=(for details see tables below)
o
Command to change the settings on the low power clock
•
Reset the module to restart in normal connectivity software
