1 ft Wire
Power: Light will indicate when the light has
power and is activated.
Pattern Changer: Hold for one second to change
the pattern.
FLASH PATTERNS:
Random - Default
Single - Split
Double - Split
Quad - Split
Quint - Split
Mega - Split
Ultra - Split
Single Quad - Split
Single High/Low - Split
Single - All
Double - All
Quad - All
Quint - All
Mega - All
Ultra - All
Single Quad - All
Single High/Low - All
Steady 2 - All
Steady 4 - All
SKU: UBL-IL-2X
ILUMEX 2X DASH LIGHT
I N S T R U C T I O N S
ATTACHING TO WINDOW:
1) Slide suction cups onto arm with the cups facing up [fig. a].
2) Clean the suction cups and window with alcohol to remove all residue
and let dry completely.
3) Stick dash light onto the interior of the vehicle’s window, set light at
desired location, and press each suction cup firmly [fig. b].
4) Use a screwdriver to loosen the screws on mounting arm, adjust housing
shroud to window, and tighten the screws to keep in desired position.
**Test the light at night before driving to ensure flashback will not
inhibit safe driving**
**Nighttime operation of lighting products may produce reflected light
within the vehicle, rendering it difficult to see. Use with caution.**
WIRING INSTRUCTIONS:
(PROFESSIONAL INSTALLATION RECOMMENDED)
1) Using wire cutters, cut wire just above cigarette lighter plug housing (or at desired length).
2) Remove black wire cover approximately one inch from end exposing wires.
3) Strip wire casing for each wire approximately ¼ to ½ inch.
4) Follow wiring diagram below:
Red
|
Power
Yellow
|
Pattern Changer
Black
|
Ground
12V
Switch
Fuse
Ground
KEY LEGEND
USING THE CIGARETTE PLUG:
1) Run wire to the cigarette lighter plug ensuring wire will not interfere with safe driving operation.
2) Insert plug into socket securely.
PLUG OPERATION:
1) Turn light on using the on/off switch.
2) Press pattern change switch down for one second and release.
3) Repeat pattern change process until you reach desired pattern.
NOTE: Once pattern is selected, the light will remain on that pattern until the pattern changing switch is pressed.
Version: A.1
a)
b)
