17.02.2020
NanoStat onM/locoM Ser es Qu ck Start Gu de
https://dl.ubnt.com/qsg/NanoStat onM_NanoStat onlocoM/NanoStat onM_NanoStat onlocoM_EN.html
5/19
LAN1 LED
LAN2 LED
S gnal LEDs
Secondary Port
Ma n/LAN* Port
Reset Button
The LED w ll l ght steady green when an act ve Ethernet connect on s made to the
Ma n/LAN port and ash when there s act v ty.
(NanoStat on M2/M3/M5 only) The LED w ll l ght steady green when an act ve
Ethernet connect on s made to the Secondary port and ash when there s act v ty.
In a rOS®, you can mod fy the threshold values for the w reless s gnal strength LEDs
on the Advanced tab under S gnal LED Thresholds. The default values are shown
below:
(NanoStat onM2/M3/M5 only) Th s 10/100 Ethernet port s used for br dg ng and
supports software-conf gurable PoE passthrough.
Note:
To use PoE passthrough on the Secondary port, a 24V, 1A PoE
adapter s requ red.
Th s 10/100 Ethernet port s used to connect the power and should be connected to
the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds wh le the dev ce s powered on. Alternat vely, the dev ce may be reset
remotely v a a Reset button located on the bottom of the PoE adapter.
* The Ma n port s labeled LAN on the NanoStat onlocoM2/M5.
locoM9
NanoStat onM/locoM Ser es Qu ck Start Gu de
