5. Connect the other end of
the CAT5/6 cable from the
mFi Current Sensor to an mFi
RJ45 port on the mFi mPort.
Refer to the User Guide on the
CD-ROM that was included with
your mFi mPort for instructions
on configuring the mFi Current
Sensor in the mFi Controller
software. The User Guide is also
available at
www.ubnt.com/mfi
Summary of Contents for mFi-CS
Page 3: ...To Machine mFi mPort Circuit Breaker and Power Source Hot or Neutral Wire ...
Page 6: ...Current Sensor Model mFi CS Installation 1 Lift the latch to open the mFi Current Sensor ...
Page 8: ...3 Close the opening of the mFi Current Sensor until the latch snaps into place ...
Page 9: ...4 Connect a CAT5 6 cable to the mFi RJ45 port of the mFi Current Sensor ...
