background image

7. 2. 2020

GBE Quick Start Guide

https://dl.ui.com/qsg/GBE/GBE_EN.html

15/18

Operating Frequency (GHz)

Worldwide

5.180 - 5.875

57 - 66

US/CA

U-NII-1

5.180 - 5.250

U-NII-3

5.725 - 5.850

57 - 66

Management Radio (MHz)

Worldwide

2412 - 2472

US/CA

2412 - 2462

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.

WARNING:

 Do not use this product in location that can be submerged by water.

WARNING:

 Avoid using this product during an electrical storm. There may be a remote

risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements

indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire hazard if
the limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service should be provided

only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has an integral safety ground

wire intended for connection to a grounded safety outlet.

a. Do not substitute the power cord with one that is not the provided approved type. Never

use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the
grounding wire.

b. The equipment requires the use of the ground wire as a part of the safety certification,

modification or misuse can provide a shock hazard that can result in serious injury or
death.

c. Contact a qualified electrician or the manufacturer if there are questions about the

installation prior to connecting the equipment.

d. Protective earthing is provided by Listed AC adapter. Building installation shall provide

appropriate short-circuit backup protection.

e. Protective bonding must be installed in accordance with local national wiring rules and

regulations.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis,
and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

GBE Quick Start Guide

Summary of Contents for GBE



















Reviews: