Static IP Address
1. Connect an Ethernet cable from the Ethernet port on your computer to the port
labeled eth0 on the EdgeRouter.
2. Configure the Ethernet adapter on your host system with a static IP address on
the 192.168.1.x subnet.
3. Launch your web browser. Type https://192.168.1.1 in the address field. Press
enter (PC) or return (Mac).
4. Enter ubnt in the Username and Password fields. Read the Ubiquiti License
Agreement, and check the box next to I agree to the terms of this License
Agreement to accept it. Click Login.
The EdgeOS Configuration Interface will appear, allowing you to customize your
settings as needed. For more information, refer to the EdgeOS User Guide, which is
available at
For more information on PoE configuration, refer to
ER-12P Quick Start Guide
×
Click for
Table of Contents
Summary of Contents for EdgeRouter ER-12P
Page 5: ...3 ER 12P Quick Start Guide Click for Table of Contents...
Page 6: ...4 ER 12P Quick Start Guide Click for Table of Contents...
Page 8: ...Optional Connecting Power 1 2 ER 12P Quick Start Guide Click for Table of Contents...
Page 9: ...3 Using SFP Ports 1 2 ER 12P Quick Start Guide Click for Table of Contents...
