Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021
12
1.9
Device Label
The following is an example of the housing label for the UBC1329AA00.
Descriptions are provided in the table below.
Wireless
(cont.)
Guest
Wireless
Network
Names
(SSIDs)
“WIFI” plus the last 6 characters of the gateway’s cable modem MAC
address (all in upper case), then “-GUEST.” “-5G” is added before “-GUEST”
when the 5GHz radio band is being used. “-2” is added to the end for
additional guest network SSIDs.
Example guest SSIDs with cable modem MAC address 64:7C:34:FE:0D:17
2.4GHz:
WIFIFE0D17-GUEST
5GHz:
WIFIFE0D17-5G-GUEST
2.4GHz:
WIFIFE0D17-GUEST-2
5GHz:
WIFIFE0D17-5G-GUEST-2
NOTE:
You can change the guest network SSIDs to personalized network
names. The process is the same as it is for the 2.4GHz and 5GHz primary
networks. Refer to:
If you change the SSID, the device does not revert to the default value
when the device is power cycled, but does revert to this default value if the
device is reset to factory defaults.
Wireless
Passwords
(WPA pre-
shared
keys)
WPA Pre-shared Key (PSK) = a key for each network, also called the
network key or the wireless password. The default network keys are
randomly generated strings, 16 characters in length.
By default, there is one common pre-shared key for all the wireless
networks (both 2.4GHz and 5GHz primary and guest radio bands) and can
be found on the device label.
Default PSK:
K1XXSX9YTSLIDN23
NOTE:
You can change the PSK/wireless passwords to personalized ones.
For detailed information refer to
Web
Interface
Login
Subscriber
User Login
Username:
admin
Password:
Random password of 12 alpha-numeric character
Example Password:
Xh4$QLg1iJRV
The password can be found on the device label.
DEFAULT VALUES
