UAZ HUNTER 315148, Operating Manual

Page: 28 / 136

28
To unlock the steering system, insert the key into the ignition
switch and, swaying the steering wheel right to left and back again,
turn the key clockwise to position 0.
To avoid false starter switching on with engine running (key
position II), the lock mechanism design includes the interlock
enabling the engine re-start only after the key is returned to
position 0.
It is prohibited
to turn the ignition off and remove the key from
the ignition starter switch while the motor vehicle is moving. The
engine stop will lead to braking capacity loss, and the steering
system shaft is blocked by anti-theft device, if the key is removed
and the motor vehicle becomes uncontrollable;
30 — windshield blowing pipes;
31 — air intake lever.
INTERIOR AND EXTERIOR EqUIPMENT OF THE
MOTOR VEHICLE
Doors
Safe type door locks and handles. The front door locks and the
tail gate lock are locked with the key. The door internal panels
are equipped with handles 1 (Fig. 3.6), by means of which the
door locks are locked from the interior (handle bottom position).
locks arrested with handles 1 cannot be unlocked from outside
the motor vehicle.
A door can be opened from inside the motor
vehicle by turning handle 2 towards you.
To open the sliding windows, push the button 4 (Fig. 3.7)
(red) of the locking handle 2, and with handle 1 or locking handle
2, move the corresponding window to the required distance.
To lock the sliding window, match the locking handle 2 with
blind sleeve 7 and push button 5 to a fixed position (until a click
is heard).
Fig. 3.6. Front door:
1 — lock arresting handle; 2 — door
opening handle; 3 — door trim