UAV-1006666-001
12
Rev A
•
Installation of the tailBeaconX should following the tailBeaconX STC
Installation Manual UAV-1003599-001.
•
Installation of the AV-30-C should follow the AV-30-C Installation
Manual UAV-1003947-001.
8 Support
For additional questions or support please visit:
https://www.uavionix.com/support/
Appendix A AV-30-C Control Head
The AV-30-C is the control interface to the tailBeaconX. Pilot inputs shown
below.
Mode
STBY
The transponder is on but will not reply to any interrogations.
ON
The transponder will respond to all interrogations, but altitude
reporting is suppressed.
ALT
The transponder will respond to all interrogations.
A
Configured Callsign
B
Current Squawk Code
C
Transponder Mode (STBY,
ON, ALT)
D
GPS NIC (integrity metric)
E
GPS NACp (accuracy metric)
F
Pressure Altitude
– Green
indicates radar interrogation
and will change to IDT if
IDENT is active.
G
Communication status (OK,
TMOUT)