UAV-1003599-001
27
Rev A
Appendix A AV-30-C Control Head
The AV-30-C is the control interface to the tailBeaconX. Pilot inputs shown
below.
Mode
STBY
The transponder is on but will not reply to any interrogations.
ON
The transponder will respond to all interrogations, but altitude
reporting is suppressed.
ALT
The transponder will respond to all interrogations.
When airborne, the transponder should always be set to ALT unless
otherwise directed by Air Traffic Control. When you are taxiing on the
ground, the transponder should be set to ALT.
For operating instructions on control of the tailBeaconX via AV-30-C, see
AV-30-C
Pilot’s Guide (UAV-1003946-001) and AV-30-C Flight Manual
Supplement (UAV-1004044-001).
A
Configured Callsign
B
Current Squawk Code
C
Transponder Mode (STBY,
ON, ALT)
D
GPS NIC (integrity metric)
E
GPS NACp (accuracy metric)
F
Pressure Altitude
– Green
indicates radar interrogation
and will change to IDT if
IDENT is active.
G
Communication status (OK,
TMOUT)
