UAV-1004233-001, AV-30-E Pilot’s Guide
21
Revision A
6.2.6 AI Mode – AoA Indication
Derived Angle of Attack can be configured for display in the inner left
area of the screen and consists of a series of colored stacked bars
that indicates the current AoA relative to the configured minimum
and maximum limits.
The lowest green bar corresponds to a current AoA matching the
configured lower limit point. The first red bar corresponds to a
current AoA matching the configured upper limit.
AoA limit points are pilot selectable and are set in the
pilot accessible Setup Menu.
Figure 13 - AI Mode, AoA Indication
AoA is determined by the difference between the aircrafts pitch angle
and the path through the air. See
Section 11 - AoA Operation and
for additional details on the AoA operation and setup.
Angle Of Attack
Pitch Angle
Flight Path
Level Ref
Figure 14 – AoA Computation
