UAV-1003946-001, AV-30-C
Pilot’s Guide
37
Revision D
Page
7.8.6 Quick Squawk VFR
BeaconX transponders store a VFR squawk code internally. By default,
this is set to 1200 for U.S. operations, but may be changed in the
transponder configuration.
In operation, there are two ways to change the squawk code to the default
VFR code:
•
Press and hold the left button until the VFR squawk code is shown in
the SQWK field
- or -
•
Press and release the center knob
.
•
Press and release the center knob to select a squawk digit
.
•
Press and release the right button to quick squawk VFR
•
Press and release the left button (
DONE
) to finish
