CM160 Multi-sensor Operations Manual
Doc#: 100-104
8/16
8 of 20
Version:1.8.0
1.3.7
IR Video Orientation
As with the Daylight camera the user is able to switch the video output between normal, inverted, revert
(horizontal flip) and invert/revert.
2.
Specifications
Gimbal Specs
Units
Position Resolution
0.011°
Position Accuracy
0.005°
Stabilization Accuracy
0.05°
Elevation
+- 120°
Azimuth
360° Continuous
Slew Rate
155°/sec
(2.7 rad/s)
Slew Acceleration
100°/s/s
Power
5w/20w
Voltage
12-36V
Physical
Weight
1450 g
Dimensions
160mm x 250mm
3.
Compatible Sensors
3.1.1
IR Cams:
FLIR TAU 2 336/640 up to a 50mm lens
Thermoteknix 110k/307k up to a 50mm lens
Opgal 320 and 640 up to a 50mm lens
3.1.2
Daylight Cams:
Sony FCB-EX Series block cameras
Gigabit Cameras
Firewire Cameras
3.1.3
Sensors
Laser Range Finder
4.
Unpacking the Box
The CM160 is well protected and packaged. It is provided in a hard ruggedised case, to provide additional
protection when it is removed from the platform or needs to be transported. The case has a foam insert
which the gimbal is stored in, along with associated cables and accessories.
When removing the CM160 take care not to apply pressure upon the actual ball section. Once the CM160 is
free of the box place it on a soft surface. Do not place the gimbal on anything which could damage the
gimbal surface.
