Page 10
MN Series Product Guide
4.0
Overview of the Timeclock
The Timeclock is a touchscreen biometric time-recording device that allows employees to clock in or
out using facial recognition, an RFID card, or a PIN. The MN1000 can store up to 100 user templates,
the MN2000 up to 200.
NOTE:
If the Timeclock detects motion, the screen will change to display a countdown, which
indicates that facial recognition is about to initiate.
4.1 Using the Timeclock Buttons
There are three buttons on the Timeclock: MENU, DEPT, and PIN.
MENU
If you press the MENU button, a password screen allows you to log in. There are two levels
of administration: Administrator and Super User.
Administrator
—The default password is 53178. Administrators can access the
Admin menu, where they can perform all of the functions available.
Super User
—The default password is 6318. After entering the password, the super
user will see the user management selection screen, where they can add user
templates to the Timeclock.
DEPT
If you press the DEPT button, a list of departments will display on the screen. You can
select a department using the touchscreen. Then you can clock in using a PIN, an RFID card,
or facial recognition.
PIN
If you press the PIN button, you can enter a PIN to clock in. The PINs are set up through the
user’s profile in your uAttend account.
4.2 Using the Timeclock Menus
There are two main menus available in the Timeclock: the Admin menu and the Super User
menu.
4.2.1 Admin Menu
The Admin menu is comprised of five sub-menus: User Management, Template,
Communication Settings, Device Management, and System Management.
User Management (“User Mgt”)
—From the User Management menu, administrators can
add new user templates, delete user templates, and search for an ID number.
