U-Turn BACKUP RS 100 Manual Download | Manualshive

Page: 12 / 30

background image

We recommend, to have your rescue system built into your harness from authorized packers
only. To ensure the rescue parachute has been installed correctly a

compatibility verification

is mandatory! Also it needs to be recorded in the service record.

Build-in of the BACKUP RS with original container

The BACKUP RS is delivered with its own container. In case the rescue pocket of your harness
does not come with its own container, the BACKUP RS container can be used.
There are two different mounting loops to fix the release handle to the inner container. Please
follow the manual of your harness for the build-in of the rescue parachute. The connection be-
tween release handle and inside container must never be under tension after built in, otherwise
there’s the risk that the opening of the rescue pocked is impaired or even inhibited.

Build-in of the BACKUP RS into a harness with integrated rescue container

In case your harness has an integrated container, that should be used. The packed rescue
parachute is taken out of the original container and built into the integrated container of the
harness. Please follow the manual of your harness on that.

Build-in of the BACKUP RS into an external rescue container

In case your harness does-not have an integrated rescue pocked, external front-container are
used. These need to be certified and compatible with the rescue parachute. Please follow the
manual of the container for that.

Build-in of the BacKuP rs

«
...
10
11
12
13
14
...
»

Summary of Contents for BACKUP RS 100































Reviews:

No comments

Related manuals for BACKUP RS 100

Brand: Nova Pages: 45

Brand: Sky Country Pages: 13

Brand: SKY PARAGLIDERS Pages: 47

Brand: Ozone Pages: 39

Brand: Jihlavan Pages: 56

Brand: Gin Gliders Pages: 7

Brand: GIN Kiteboarding Pages: 15

Brand: Eiri-Avion Pages: 12

Brand: Ozone Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands