10
Operation
5.1 Basic Weighing
1. Press
“
TARE
”
to zero the scale in the no-load state.
2. Place the weighing sample on the weighing pan.
3. After the display stabilizes, read the value displayed.
Weighing a sample that needs to be in a container:
1. Place the weighing container on the weighing pan.
2. Wait for the display to stabilize. Then press
“
TARE
”
to tare, and the
displayed value will return to zero.
3. Place the sample(s) to be weighed in the weighing container.
4. After the display stabilizes, read the value displayed.
* Overweight Alarm
When
“
------
”
is displayed in the weighing state, it indicates that the
sample weight exceeds the maximum range of the scale. The sample
should be removed immediately to avoid damage to the scale.
