U-Reach Super1 Series User Manual Download | Manualshive

Page: 12 / 20

background image

10

Caution

If Secure Erase process is interrupted, the device will be locked. Please
execute again and wait until it finishes.

4.7 Enhanced Secure Erase

This function erases devices that supports this feature.

Scroll to select "4.7 Enhanced Secure Erase", then press "OK" to start the erasing
process.

5. Utility

This menu contains submenus related to device information, system information
and updates.

Scroll to "5. Utility”, then press "OK" to view the submenus.

5.1 Show Disk Info

This function will display basic information such as device model, name,
capacity, etc…

Scroll to select "5.1 Disk Info”, then press "OK" to view the connected device(s).
Then scroll through to view connected device(s) by port number order.

5.2 Update System

Step 1: Prepare a device for update.

Connect a device to the source port. Scroll to select "5.2.2 Create BIOS Format”,
then press "OK" to start the format process. This will format the device to a 2GB
FAT32 Partition.

Step2: Download Firmware

Connect this device to PC. Download the latest firmware provided by supplier’s
technical support, unzip the BIOS firmware, then save it to the root directory in
the device.

Note

Ensure that the device does not have any bad sectors.

«
...
10
11
12
13
14
...
»

Summary of Contents for Super1 Series





















Reviews:

No comments

Related manuals for Super1 Series

Brand: Teac Pages: 1

Brand: Teac Pages: 2

P-55 AutoPrinter

Brand: Teac Pages: 1

Brand: Disc Makers Pages: 13

Brand: Disc Makers Pages: 14

Brand: Disc Makers Pages: 26

Brand: Disc Makers Pages: 31

Brand: Condre Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands