U-Reach PRO198 User Manual Download

Page: 9 / 18

Functions

1. Copy

Step 1: Prepare source and target devices.

Step 2: Connect source and target devices.

Step 3: Proceed to copy.

Scroll to select "1. Copy", then press "OK" to start the duplication process.

Caution

It is recommended to reboot the machine after manually stopping the copy.

Step 4: Copy Completed!

2. Compare

Proceed to verify device(s).

Scroll to select "2. Compare", then press "OK" to start the verification process.

3. Copy+Compare

Sequentially automates from Function 1, Copy to Function 2, Compare.

Scroll to select "3. Copy+Compare", then press "OK" to start the automated
duplication and verification process.

Caution

User is responsible for verification of targets’ quality. Testing a few completed
targets in a mass production environment for quality control is
recommended.

4. Erase

There are 7 submenu modes.

Step 1: Connect device(s) for sanitizing.

Note

Recommendation: Target device(s)’ capacity must be equal to or larger than
the source device capacity.

Note

⚫

Press “ESC” for 5 seconds to stop all the copy jobs.

Caution

Please back up all important data before using this function.

Summary of Contents for PRO198



















Search results

Summary of Contents for PRO198

Reviews:

Related manuals for PRO198

Brands by name

Popular brands

U-Reach PRO198, User Manual

Search results

Summary of Contents for PRO198

Reviews:

Related manuals for PRO198

Brands by name

Popular brands