8
Function Description
1. Copy
Step 1: Prepare source and target devices.
Step 2: Insert source and target devices.
Step 3: Proceed to copy.
Scroll to select "1. Copy", then press "OK" to start the duplication process.
The information below states what is displayed on the LCD during duplication.
Step 4: Copy Completed!
The quantity of passed or failed target device(s) and the copied duration will be displayed
on the LCD after duplication completes.
Note
Recommendation: Target device(s)’ capacity must be equal to or larger
than the source device capacity.
Note
The number of working/connected targets will be displayed on LCD. Press
"OK" to start.
Note
⚫
Before duplication, select the data area at "7.2 Copy area"
⚫
Press
↑↓
together for 5 seconds to stop operation on the slowest
device.
⚫
Press “ESC” for 5 seconds to stop all the copy jobs.
Caution
It is recommended to reboot the machine after manually stopping the
copy.
SD Duplicator
1.
Copy (Data)
Copy 7695M
3% 0:27 (3)270M
(3) indicates Port #3 is the slowest.
