5
Function Table
*Below functions and features subject to change without notice.
Function
Description
1. Copy
Copies data only or whole media duplication.
2. Compare
Compares the data bit by bit between the source and all other
copied flash medias.
3. Copy&Compare
First copies then compares the copied flash media with the source
immediately after the copy has finished.
4. Capacity Check
Checks the real capacity of the flash.
5. Information
5.1 SD Card Info.
Shows flash’s information of data; file format, content size, and
capacity.
5.2 System Info.
Shows information about the duplicator system, including
machine model number and software version.
6. Utility
6.1 Do
Format
6.1.1 Auto Format
Auto formats media to be FAT16 or 32.
6.1.2 FAT16 Format
Formats media to be FAT16.
6.1.3 FAT32 Format
Formats media to be FAT32.
6.1.4 exFAT Format
Formats media to be exFAT.
6.1.5 Set FAT 16 Cluster Size
Sets the size of FAT16 Cluster.
6.1.6 Set FAT 32 Cluster Size
Sets the size of FAT 32 Cluster.
6.2 Measure Speed
Measures the flash reading and writing speed. This function will
damage the format and content.
6.3 Media
check
6.3.1 H3 Safe
Checks the quality of flash by reading it. This safe
check will not change flash’s content and format.
