Integrated Technical Vision Ltd.
1
A programmable reader
for mobile
, Mifare® and Mifare®Plus identifiers
U-Prox mini MF
User manual
Introduction
U-Prox mini MF reader is intended to be applied in different access control
systems, using RS232, Wiegand 26, Wiegand 32, Wiegand 34, Wiegand 37,
Wiegand 40, Wiegand 42, Wiegand 56, Wiegand 58, Wiegand 64, Wiegand auto
and TouchMemory interface. The direct and reverse ID bytes order supported.
Personification of mobile
and Mifare® identifiers is supported by setting an
additional secure mode.
Reader supports 2 operation mode for smartphones with U-Prox ID:
–
"Door" - up to 60-70 cm
–
"Barrier/Gate" - adjustable range of interaction from 1 to 15 m.
Identifiers types
U-Prox mini MF proximity reader operates with various kinds of Mifare
®
cards:
Mifare® Plus (SL1 and
SL3 modes), MIFARE
®
Standard, MIFARE
®
Ultralight, MIFARE DESFire, MIFARE CLASSIC 1k,
MIFARE Classic 4k, MIFARE CLASSIC 7UID and/or U-Prox IDs.
The adjustment of the reader, its interface and identifiers' type settings is provided with mobile
application. The reader can be programmed to operate with Mifare
®
and/or U-Prox ID.
Design
The reader has elegant plastic sealed
enclosure with IP66 class.
Benefits
Case
Material
ABS plastic
Color
black, gray, white
Dimensions
42,8х80х12,5 mm
Weight
70 g
Ambient
Oper. temp.
-
35°C . . . +60°C
Conditions
Humidity 100% rel. at +25
0
C
Power
Voltage
+9. . . +15 VDC
Supply
Max current up to 80 mA
Voltage ripple up to 500 mV
p-p
Read range
Typical read range is 50 mm and depends on tag
type used and installation environment.
Wiring
R
eader has 8 wire cable for connecting to access
control panel. The reader terminal functions
are
listed in the table above (+V - external 12
V): We recommend to use multi-core signal cable
with 0.22 mm
2
cross-section of each wire between
reader and panel.
minimum distance to panel is up to 150 m (Wiegand interface) with this cable.
Refer to the Figure 1 for twisted pair reader connection to the panel.
Types of interfaces
Depending on modification, reader supports one of the following interfaces: Wiegand 26, 32, 34, 37,
40, 42, 56, 58, 64 or standard with automatic selection (W26, W32, W34, W37, W40, W42, W56, W58,
W64), RS-232C (RS), enhanced encrypted RS Pro protocol or TouchMemory.
Colour
W2 / W3 /
W4 / WS
RS232
DB-9
Touch
Memory
Functions
Green
Data 0
Rx
3
iButton
White
Data 1
Tx
2
-
Red
+V
+V
+V
Black
GND
GND
5
GND
Brown
Red Led
-
Red Led
Orange
Green Led
-
Green Led
Blue
Beep
-
Beep
Yellow
Hold
Hold
Hold
Figure 1
