http://u-prox.com
9
Terminals
Colour / №
Name
Function
9-wire cable
Red
+12 V
Connection to the power supply, connection of an
external reader
Black
GND
Connection to the power supply, connection of an
external reader, common for input loops
Yellow
Z1
Terminals for Loop
Orange
Z2
Brown
NC
(normally closed)
Relay contacts
Blue
NO
(normally open)
Grey
С1
(общий)
White
D1
(Data 1)
Connection of an external reader
Green
D0
(Data 0)
USB connector
USB Mini B
USB connector
Used for the initial configuration of the network
settings
Ethernet connector
1
TX
+
Connecting Ethernet cable.
Terminals are measured from LED indicators:
Fig. 3
. Marking terminals
2
TX
–
3
RX
+
4
RX
–
Sound and light panel
Yellow LED:
Standby mode
(periodic blinking):
o
1 short pulse once per second
- communication - Working in notification
mode, connection normal;
o
2 short pulse once per second
- communication - Working in the
notification mode,
no connection
frequent blinking
- downloading data from the server
uploading mode
:
o
LED is on for 5 seconds
- the detection of removed top cover, uploading
mode start
o
frequent blinking
- waiting in uploading mode (with removed top cover),
this indication means that the attempt to upgrade the firmware failed
o
6 short beeps - successful upgrade of firmware
o
2 short beeps - uploading mode exit
6
short beeps
(with shorted pins D0 and D1)
– Factory reset .
Green LED 1 -
Link
(next to the jack Ethernet):
On - Ethernet cable is OK
Green LED 2 -
Eth. Activity
(next to connector USB)
Frequent blinking - Data Exchange
