32
ASSEMBLE INSTRUCTION
11.
Attach Left Fixed Handlebar Set (F) onto the attachment tube as shown in the photo below.
1. Insert the Sensor Wire (F-3) into the installation tube and pull through the top of the
Computer Post (B-1) as shown in the photo’s below.
2. Fasten the Left Fixed Handlebar Set ( F) onto the attachment tube using the attachment
hardware V-17 (2) and V-18 (2).
3. Follow the same assembly procedures as above to assemble the right side.
12.
Attach Sensor Wires (F-3) and Computer Cable (A-46) to the Computer Set ( U) and fasten
the Computer using attachment hardware U-3 (4) as shown in the diagram below.
