USER GUIDE
Control Operation
u-line.com
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
NOTES
ON/OFF
Press
and hold for 5 seconds
Unit will turn ON or OFF
Leave interior light on
Press
and release to leave interior
light on for 3 hours; press again to
deactivate
After 3 hours, factory default is restored; light will turn
on when door is open
Adjust temperature
Press
or
and release
When the display is flashing, press or to adjust
the set point temperature. Note: temperature
displayed is the actual temperature inside unit
Toggle between
o
F /
o
C Hold
and
for 5 seconds
The display will change units
Enable Sabbath Mode
Press
and hold for 5 seconds and
release.
The
o
F /
o
C symbol will flash briefly after 5 seconds.
Interior light and display will go dark and remain so
until user resets mode - unit continues to operate
Disable Sabbath Mode
Press
and release
Display and interior light return to normal operation
This unit is Star-K certified. See www.star-k.org for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• A tone will sound for several seconds every minute
•
will appear in display
Close door to silence alert and reset
18
