USER GUIDE
Door Adjustments
u-line.com
Door Adjustments
HINGE COVER
The hinge cover
included with the literature bag
is
optional.
To install hinge covers:
1.
Press hinge cover squarely over hinge.
DOOR ALIGNMENT AND ADJUSTMENT
Align and adjust the door if it is not level or is not sealing
properly. If the door is not sealed, the unit may not cool
properly, or excessive frost may form in the interior.
NOTICE
Properly aligned, the door’s gasket should be
firmly in contact with the cabinet all the way
around the door (no gaps). Carefully examine
the door’s gasket to ensure that it is firmly in
contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of
the door.
To align and adjust the door:
1.
Gently pry off hinge cover from top of unit.
2.
Loosen (do not remove) top and bottom hinge screws
using a
Torx T-25
screwdriver on the top and a 1/4”
socket on the bottom.
3.
Align door squarely with cabinet.
4.
M
ake sure gasket is firmly in contact with cab
inet all
the
way around the door (no gaps).
5.
Tighten bottom hinge screws.
3.
Tighten top hinge screws and replace hinge cover.
Reversing the Door
Location of the unit may make it desirable to mount the
door on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
TO REVERSE THE DOOR
Remove grille:
Remove the grille (see GRILLE INSTALLATION section of
this guide).
Remove top hinge and door:
1.
Remove hinge cover from top of unit.
2.
Hold door to keep it from falling.
3.
Remove top hinge from cabinet using a
Torx T-25
screwdriver to remove three screws.
4.
Use Philips screwdriver to remove hinge pin and
reinstall on the opposite surface of the hinge.
Hinge Cover
18