USER GUIDE
Control Operation
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
NOTES
ON/OFF
Press and hold down for 5 seconds
Unit will turn On or OFF
Leave interior light on
Press and release to leave interior
light on for 3 hours; press again to
deactivate
After 3 hours, factory default is restored; light will
turn on when door is open
Adjust Temperature
Press or and release
When the display is flashing, press or to
adjust the set point temperature. Note: temperature
displayed is the actual temperature inside unit
Toggle between ºF / ºC
Hold and for 5 seconds
The display will change units
Enable Sabbath Mode
Press and hold for 5 seconds and
release
The oF / oC symbol will flash briefly after 5 seconds.
Interior light and display will go dark and remain so
until user resets mode - unit continues to operate
Disable Sabbath Mode
Press
and release
Display and interior light return to normal operation
Showroom Mode
Hold and for 5 seconds
Display will show
SH
for 2 seconds. Interior light and
display will function normally, but the compressor
and fans will not energize.
Repeat command to return to normal operation.
Display will show
EH
for 2 seconds.
This unit is Star-K certified. See www.star-k.org for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
•
will appear in display
17
