background image

USER GUIDE

U-Line Wine Guide 2

SAFETY • INSTALLATION & INTEGRATION • 

OPERATING INSTRUCTIONS 

• MAINTENANCE • SERVICE

Common Food and Wine Matches

A Toast to Wine Truths

Like the grapes themselves, many wine myths have been 
cultivated over the centuries. 

Myth 1:

 

Most wines taste better when aged.

Truth:

 

In fact, less than 5% of wines produced today are 

meant to be aged. Most wines are crafted to be consumed 
within the first one to two years.

Myth 2:

 Wines should be uncorked and decanted allowing 

them to “breathe.”

Truth:

 

To breathe or not breathe? While it is better to 

allow a young tannic Red to breathe in a glass or decanter 
to soften the tannins, an old Red reaches a stage in its life 
where it should be enjoyed soon after opening. Allow an 
old Red to breathe for a short time to dissipate any off 
odors. Most white wines can be served, ideally, 10-15 
minutes after opening.

Myth 3:

 

When age worthy wines peak, they must be 

consumed almost immediately.

Truth:

 Most great wines reach a plateau period rather 

than a peak. Great Bordeaux’s may have as much as a 
10-year plateau before fading.

Myth 4: 

Wine color does not change with aging.

Truth:

 

As red wines age they get lighter in color while 

whites get darker.

The Cork: A Mystery on Its Own

Cork Presentation. The ritual of the presentation of the 
cork has a rich and fascinating history dating back to the 
late 1800’s. A phylloxera (root louse) devastation to the 
vineyards severely limited the supply of great wines. 
Restaurateurs would remove labels on inferior wines and 
replace them with labels from superior wines. This made it 
necessary for patrons to protect themselves by checking 
the branding on the cork to ensure that what they ordered 
was, in fact, what they were served. 

When presented with a cork today, feel it to check for its 
integrity, read and match the branding on the cork to the 
bottle and set it aside. There is little to be learned from 
the cork. The proof is in the wine.

“Corked” wines. If you’ve ever had a wine that smelled or 
tasted of mold, you’ve experienced a wine that may have 
been “corked.” Today, between five and eight percent of 
wines are tainted with Trichloroanisole (TCA). This 
substance, found naturally in plants and trees, is imparted 
to the wine through the cork. Corked wines are a major 
concern for winemakers as it destroys millions of cases 
per year and puts reputations at stake. Amazing as it may 
seem twist-off caps may offer a better alternative and 
many great wineries in California, Australia and New 
Zealand are pioneering the trend.

Foods

Wines

Fish, Shell Fish, Crab, Oysters

Dry White Wines, Light 

Sparkling or Extra Dry 

Champagne

Beef, Venison

Full-Bodied Red Wines

Pork, Veal, Lamb and Poultry

Light-Bodied Red Wines

Fruit

Sweet White and Sparkling 

Wines

25

Summary of Contents for U-1224WCB-00B



























































Reviews: