background image

Introduction to U-Line

FOR PRODUCT ASSISTANCE, CALL 1-800-779-2547

MILWAUKEE, WI U.S.A.

Serial/Serie:

Model/Modele:

HIGH SIDE DESIGN PRESSURE 300 PSI
LOW SIDE DESIGN PRESSURE 140 PSI

REFRIGERATOR AND/

BTL

LISTED 674R

OR FREEZER

HOUSEHOLD

U

C

L

R

US

www.u-line.com

1

2

Introduction

Congratulations on your purchase of a U-Line refrigeration 
product. 

Building on 45 years, U-Line has captivated those with an 
appreciation for the finer things with exceptional design, inspired 
innovations and attention to even the smallest details.

U-Line is synonymous with premium built-in under counter ice 
making, refrigeration and wine storage appliances, the U-Line 
Corporation is committed to luxury under the counter. U-Line is 
known and respected for unwavering dedication to product 
innovation, quality and selection. A bold and broad line of models 
is the product of visionaries in the pursuit of distinctive living 
environments in the kitchen and spaces beyond.

In 1962, Henry Uihlein founded U-Line Corporation as an 
outgrowth of Ben-Hur Freezer Company and was the first to 
develop and patent an automatic stand-alone under counter 
residential ice maker. His foresight and determination to develop 
new ideas and to succeed when there were no clear guidelines or 
solutions are evident today. The Milwaukee, Wisconsin based 
family operated business provides continuity and vision from which 
innovations continue to be born.

Going forward, U-Line will continue offering best-in-class products 
that build on the company's numerous patents and world firsts to 
guide the under counter industry in realizing its unlimited 
potential.

Read and save this Use and Care Guide.

IMPORTANT

IMPORTANT

READ all instructions in this guide completely before 
using the appliance for the first time.

For future reference, keep this guide in a safe, accessible location. 
If you need additional information or assistance, please contact U-
Line Corporation direct. Contact information appears on the back 
cover of this guide.

Before Calling Service. 

If you think your U-Line product is 

malfunctioning, read the OPERATION section of this guide to 
understand clearly the function of the control. If the problem 
persists, read the TROUBLESHOOTING GUIDE section of this 
guide to help you quickly identify common problems, and provide 
information on possible causes and remedies.

Please record the model number (1), serial number (2), date of 
purchase, and dealer contact information for your U-Line product 
below:

Model Number:

________________________________________________

Serial Number:

________________________________________________

Purchase Date:

________________________________________________

Dealer Name:

________________________________________________

Dealer Address:

________________________________________________

Dealer Telephone:

________________________________________________

Please Record Your Model Information

You will need your product model and serial number when you 
request additional information or services. You can find this 
information on the serial plate located on the upper right or back 
wall in the interior of your product. This information also appears 
on the warranty registration card.

Summary of Contents for Origins SP18





















Reviews: