background image

U-Line Warranty

1. U-Line Corporation ("U-Line") warrants each U-Line 
product to be free from defects in materials and 
workmanship for a period of one year from the date of 
purchase.  U-Line further warrants the sealed system 
(consisting of the compressor, the condenser, the 
evaporator, the hot gas bypass valve, the dryer and the 
connecting tube) in each U-Line product to be free from 
defects in materials and workmanship for a period of five 
years from the date of purchase.  

2. During the initial one year warranty period for all U-
Line products U-Line shall: (1) repair any product or 
replace any part of a product; and (2) for all Marine, RV 
and Domestic U-Line products sold and serviced in the 
United States (including Alaska and Hawaii) and Canada, 
U-Line shall be responsible for the labor costs performed 
by a U-Line authorized service company, incurred in 
connection with the replacement of any defective part.  
During years two through five of the warranty period for 
the sealed system, U-Line shall: (1) at U-line’s option repair 
or replace any part of the sealed system; and (2) for all 
Marine, RV and Domestic U-Line products sold and 
serviced in the United States (including Alaska and 
Hawaii) and Canada, U-Line shall be responsible for the 
labor costs incurred in connection with the replacement 
of any defective part of the sealed system.  All other 
charges, including transportation charges for 
replacements under this warranty and labor costs not 
specifically covered by this warranty, shall be the 
responsibility of the purchaser.  This warranty extends 
only to the original purchaser of the U-Line product.  The 
registration Card included with the product should be 
promptly completed by you and mailed back to U-Line or 
you can register on-line at www.u-lineservice.com.

3. The following conditions are excluded from this limited 
warranty: damage caused by outdoor use; use of cleaners 
other than the recommended stainless steel cleaners and 
U-Line Clear Ice Maker cleaner; installation charges; 
damages caused by disasters or acts of God, such as fire, 
floods, wind and lightning; damages incurred or resulting 
from shipping, improper installation, unauthorized 
modification, or misuse/abuse of the product; customer 
education calls; food loss and spoilage; door and water 
level adjustments (except during the first 30 days from the 
date of installation); defrosting the product; adjusting the 
controls; door reversal; and cleaning the condenser.

4. U-Lines' Outdoor Limited Warranty, set forth in this 
Paragraph 4, shall apply to U-Line models deemed 
suitable for outdoor use by Underwriters Laboratory 
("UL") as noted in the U-Line Product Catalog, U-Line's 
website and/or on the serial tag located inside the 
product.  Exposure to temperatures below freezing may 
cause damage to the product.  Damage resulting to the 
product (and/or the surroundings) caused by this exposure 
is not covered under this warranty.  Such models shall 

continue to be covered by the warranty terms set forth in 
Paragraphs 1 and 2 above, to the extent such models: 

A. Are subjected to temperatures between 50 and 100 
degrees Fahrenheit.  Although these products will 
function in ambient temperatures below 50 degrees and 
above 100 degrees Fahrenheit, performance may decline.  
Performance degradation due to operating above or 
below the designated ambient temperature range is not a 
manufacturing defect and any issues resulting from 
exposure to higher temperatures, such as spoiled food or 
low ice production, are not covered under this warranty 
policy; and/or

B. Come into contact with rain by virtue of outdoor use.  
Exposure to other sources of water shall also cause this 
warranty to be void, including flooding of the area in 
proximity of the unit greater than 1/8” deep in water, 
hurricanes, splashing of pool water, or directing a spray 
from a hose or similar device into and around the unit.  

5. If a product defect is discovered during the applicable 
warranty period, you must promptly notify either U-Line 
at P.O. Box 245040, Milwaukee, Wisconsin 53224 or at 
800-779-2547 or the dealer from whom you purchased the 
product.  In no event shall such notification be received 
later than 30 days after the expiration of the applicable 
warranty period.  U-line may require that defective parts 
be returned, at your expense, to U-Line's factory in 
Milwaukee, Wisconsin, for inspection.  Any action by you 
for breach of warranty must be commenced within one 
year after the applicable warranty period.

6. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR IMPLIED WARRANTY OF 
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH 
ARE DISCLAIMED.  U-Line’s sole liability and your 
exclusive remedy under this warranty is set forth in 
the paragraphs above.  U-Line shall have no liability 
whatsoever for any incidental, consequential or 
special damages arising from the sale, use or 
installation of the product or from any other cause 
whatsoever, whether based on warranty (express or 
implied) or otherwise based on contract, tort or any 
other theory of liability.

7. Some states do not allow limitations on how long an 
implied warranty lasts or the exclusion or limitation of 
incidental or consequential damages, so the above 
limitations may not apply to you.  This warranty gives you 
specific legal rights, and you may also have other rights 
which vary from state to state.

U-Line Corporation Limited Warranty

Summary of Contents for Origins SP18





















Reviews: