PAGE 1 OF 9
1021 IH-9620
1-800-295-5510
uline.com
H-9620
96
X
78" L-SHAPED
PACKING TABLES
BASE TABLE
1. Insert adjustable feet (1) into legs (2) and slide into
place at desired height.
NOTE: If desired, insert locking tabs through
legs and adjustable feet to lock feet into place.
2. Place legs (2) in upright position. Legs should be
placed approximately 45" apart.
3. Attach stringers (3) to table legs using center six
holes in back legs. Fasten with 12 bolts, lock washers
and nuts.
4. Place lower shelves (4) across braces of legs. Attach
lower shelves using eight nuts and bolts.
5. Place 96" tabletop (5) on a smooth, non-marring
surface with top side facing down.
6. Flip the assembled frame upside down and line up
with the pre-drilled holes on the bottom side of the
top.
LEGS AND FRAME ASSEMBLY
#
DESCRIPTION
QTY
1
Adjustable Foot
9
2
Leg
4
3
96" Stringer – 2-Piece
1
4
96" Lower Shelf – 2-Piece
1
5
96" Tabletop
1
6
L-Leg
1
7
48" Stringer
1
8
48" Tabletop
1
TOOLS NEEDED
Phillips Head
Screwdriver
7/16" Wrench
3/8" Wrench
10 mm Wrench
(For Non-Steel Top Assembly)
1/4"-20 x 5/8" Bolt x 28
#14 x 3/4" Wood Screw x 46
1/4"-20 Nut x 28
Lock Washer x 28
Locking Tab x 9
Hardware Kit
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Flat Head
Screwdriver
Drill
(Optional)
3/16" Drill Bit
(Optional)
4
4
5
8
7
6
7
1
2
3
3
