PAGE 1 OF 6
0823 IH-8675
8' LAGUNA BENCH
1-800-295-5510
uline.com
H-8675
CAUTION! Do not drive attachment screws too
deeply, as the screw could protrude through
slat on the seating side of bench.
1. Verify all parts are present before beginning.
2. With one person holding the left leg and another
person holding the right leg, insert a rounded-edge
board between each leg, in line with the front of the
legs. From underneath, attach the front board to the
supports by fastening screws through the pre-drilled
holes on the underside of the leg. Do not overtighten.
(See Figure 1)
Front and Top Board
with Rounded Edge x 2
Right Leg x 1
2" Screw x 96
Figure 1
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
PARTS
ASSEMBLY
3/8" Spacer x 2
Seat and Back
Board x 6
Left Leg x 1
Right Leg x 1
Center Leg x 2
TOOL NEEDED
Power Drill
Square Head Bit
Two Person Assembly
Recommended
Square Head Screw x 96
