PAGE 1 OF 6
0421 IH-5054
1-800-295-5510
uline.com
CONFERENCE TABLE
H-5054, H-5055
NOTE: Assemble on a smooth, non-marring
surface to avoid scratching the table.
• Check that all parts are included.
IMPORTANT: The arrow on the camlock (B) must
point toward the camlock pin (A) for proper
alignment. Turn camlock (B) clockwise until it
locks with pin (A).
1. Insert four camlocks (B) into corresponding holes on
modesty panel (1). Insert four camlock pins (A) and
four dowels (C) in legs (2). Fit leg (2) and modesty
panel (1) together and turn each camlock (B)
clockwise until it locks. Cover each camlock (B) with
a camlock cap (H). (See Figure 1)
2. Repeat to attach second leg and modesty panel
together. (See Figure 1)
TOOLS NEEDED
Phillips
Screwdriver
Drill
(Optional)
PARTS
ASSEMBLY
Camlock Pin x 12
Screw x 35
#4 5/8"
Deep Camlock
Cap x 5
Camlock Cap x 7
Camlock x 12
Dowel x 11
Floor Glide x 4
L-Bracket x 5
A
F
G
H
B
C
D
E
IMPORTANT: Function of Cam
1/4 Right Turn
for Locking
Make sure the arrow is pointing upwards
before inserting into the panel's hole.
1
2
2
2
1
C
A
B
H
Figure 1
Two Person Assembly
Required
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
