PAGE 1 OF 3
0521 IH-4210
H-4210
FABRIC SLED BASE
CHAIR WITH ARMS
1-800-295-5510
uline.com
1. Align leg mounting plates with holes on bottom of
seat cushion. Use four M8 x 20 mm screws to secure
loosely. Repeat on opposite side. (See Figure 1)
NOTE: Do not tighten screws until assembly is
complete.
2. Align back cushion with holes in back mounting
plate. Use four M6 x 25 mm screws to secure loosely.
(See Figure 2)
3. Use Phillips screwdriver to fully tighten all screws.
PARTS
ASSEMBLY
Para
Español, vea página 2.
Pour le français, consulter les page 3.
TOOL NEEDED
Phillips Screwdriver
Seat Cushion x 1
Back Cushion x 1
Leg with Armrest x 2
M8 x 20 mm Screw x 8
M6 x 25 mm Screw x 4
Hardware Kit
Figure 1
M8 x 20 mm screw
Figure 2
M6 x 25 mm
screw
