PAGE 1 OF 2
0414 IH-3421
π
H-3421
MISTING FAN
1-800-295-5510
uline.com
SET UP
1. Place empty tank in the approximate location to be
operated.
NOTE: Carrying a full tank of water is difficult.
When full the tank weighs approximately 80 lbs.
2. Fill water tank.
3. Place the fan/pump enclosure on the 10 gallon
water tank. (See Figure 1)
4. Make sure intake line and filter are on bottom of
water tank.
CAUTION! Always operate the misting fan on a
level surface. The fan can become top heavy
when most of the water is removed from the
tank. Keep a minimum of two gallons of water
in the water tank at all times.
TEST GFCI SAFETy PluG
The GFCI safety plug provides protection from electric
shock by examining the fan's electrical curcuit for
current leakage. It must be tested before each use to
assure safe operation.
1. Plug the GFCI safety plug into a 120 VAC 60 Hz
grounded outlet. The indicator will show if power is
available.
2. Press the test button. The indicator will turn off.
3. Press reset button. If GFCI resets, the fan is ready to
be used.
Fan/Pump
Enclosure
10 Gallon
Water Tank
GFCI
Safety Plug
Intake line
Filter
Figure 1
