PAGE 1 OF 6
0421 IH-3402
LOCKOUT/TAGOUT
KIT – ELECTRICAL
1-800-295-5510
uline.com
H-3402
CIRCUIT BREAKER LOCKOUT INSTRUCTIONS
H-3440 STANDARD CIRCUIT BREAKER LOCKOUT
1. Move breaker to off position.
2. Open red handle of lockout. (See Figure 1)
3. Place lockout over breaker toggle. Turn black knob
of lockout clockwise until grips touch toggle. Do not
overtighten. When the handle is closed, the grips will
tighten against the toggle. (See Figure 2)
4. Move red handle to closed position. Check that
lockout is secure and breaker cannot be moved
to "on" position. (See Figure 3)
5. Apply padlock.
H-3439 OVERSIZED CIRCUIT BREAKER LOCKOUT
1. Move breaker to off position.
2. Open red handle of lockout. (See Figure 1)
3. Place lockout on the side of breaker toggle. Turn
black knob clockwise until grips touch toggle. Do
not overtighten. When handle is closed, the grips will
tighten against the toggle. (See Figure 4)
4. Move red handle to closed position. Check that
lockout is secure and breaker cannot be moved
to "on" position. (See Figure 3)
5. Apply padlock.
Figure 1
Figure 2
Figure 3
Breaker Toggle
Figure 4
Breaker Toggle
3 Keyed-Alike Padlocks
1 Snap-On Hasp
1 Hasp
12 Tags
1 Circuit Breaker Padlock
5 Circuit Breaker Lockouts
1 Wall Switch Lockout
COMPONENTS
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
