0814 IH-2901
PAGE 1 OF 3
SLIDING STORAGE
SHELVES
π
1-800-295-5510
uline.com
H-2901, H-2902, H-2903
H-2904, H-2905, H-2906
H-2907, H-2908
ShElvinG Unit
1. Make sure post is positioned as shown. (See Figure 1)
2. Use a rubber mallet to tap levelers into posts.
(See Figure 1)
3. Unscrew and remove the bolts from the levelers.
4. Start with the lowest shelf. Snap the interlocking
pieces of a shelf support (wide end down) around
the post at the lowest groove where shelf is to be
located. Slide the support up or down until it snaps
into the groove. Add a shelf support to the same
place on the remaining posts. (See Figure 2)
NOTE: NSF requires food service applications to
keep the lowest shelf at least 6" above the floor.
End track x 4
Stop x 4
Adjustable Pin x 6-10
Bolt x 8
Allen Key x 1
Roller Assembly x 6-10
Middle track x 2-6
in addition to the posts, shelves, levelers and shelf supports from the
Adjustable Open Wire Shelving, this kit includes the following:
03
04
05
06
07
08
09
Figure 1
Figure 2
PARTS
ASSEMBLY
