PAGE 2 OF 9
0521 IH-2307
MOUNTING INSTRUCTIONS CONTINUED
3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
4. Drill into wall at four marked locations with an
appropriate drill bit. (See Figure 4) Insert wall
anchors if necessary.
5. Hold dispenser over previously drilled holes and
insert screws.
Figure 3
Figure 4
Recommended Mounting Locations
DISPENSER SETTINGS
NOTE: This dispenser is designed to
accommodate thin towels and heavy duty
wipers.
1. Before loading product, review which setting the
dispenser opening displays. "0" should be for thick
wipers. "6" should be for thin paper. (See Figure 5)
NOTE: If towels are too easy to pull, decrease
the dial setting.
2. To adjust the dial, use dispenser key. Place the key
into the four-pronged circle with pointed end facing
in. The key should fit between two of the prongs.
(See Figure 6)
3. Twist the key firmly to desired setting. Twisting the key
clockwise will increase the number, while
counterclockwise will decrease.
1
0
2
3
4
5
6
Figure 5
Figure 6
Thick Wipers
Thin Paper
